Scraper bar replacement for Greenworks GD82ST 82V
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
part number R0101068-00. Can be printed if you don't have an original.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 132
- Makes
- 0
- Views
- 946
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
My Greenworks GD82ST snow blower's scraper bar broke (part number R0101068-00), and the delivery time is a month, but it snows every day, so I modeled and printed a replacement.
To print, you need a printer capable of printing a part with a width of 300 mm. I suggest to print two parts from PETG; set the number of top and bottom layers to 8-10 and/or set number of wall to 5-10. Parts can be glued together with dichloromethane.
Supports required for pins only. I suggest to leave supports that touching bed plate only.
Tip: If it's hard to screw it with your snow blower - use thinner screws.
Tip2: Usally not required, but check that wheels, screaper and stops at the same line. If it's not - adjust stops (see image).
Update 24.01.2024: Updated model with better edge layout + other minor changes, it now scrap better.