GreenWorks Pro Leaf Blower 90° & 160° Attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for gutter cleaning work.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the GreenWorks Pro model 2400402 leaf blower, with an existing attachment outlet diameter of ~ 69mm.
I modeled the attachment very slightly oversized for the greenworks tube (~1mm larger). I'd rather add a wrap of tape before installing it, than have it be just barely too tight to fit. I made it to attach with three self-tapping screws. I added three wraps of electrical tape for a very snug compliant fit.
I'm currently printing the 90° model in ASA-CF. I went with an elevated and angled print with full supports to avoid overhangs and much higher supports at the outlet. 3 walls and 15% cross hatch infill.
The 160° model will be much more demanding of filament and supports, so I'm working with the smaller model first to see if it's good enough for the work at hand.