IKEA Skådis Greenworks 40V Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 40V Greenworks Battery Holder that mounts to the SKÅDIS System with T-Nuts
- Ocena
- 4,5 / 5
- Polubienia
- 31
- Pobrania
- 256
- Wydruki
- 2
- Wyświetlenia
- 986
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Greenworks 40V Battery Holder for IKEA SKÅDIS System
04/27/24 UPDATE: I made a version 2 that now has the same alignment plugs as my other Skådis designs, for easier installation. Also threw in a Greenworks logo like the Makita parts.
I made this battery holder for my Greenworks 40V yard tools (mower, leaf blower, etc) that mounts to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178. See their collection of T-Nut mounted parts below.
The result is a part that holds the batteries firmly on the board and slides up and out easily. I've designed the part to be able to lie flat on the print bed without any supports for a quick clean print.
BOM V1:
- 1 x SKÅDIS Greenworks 40V Battery Holder (this printed part)
- 4 x printed SKÅDIS T-Nuts from 6d6178.
- 4 x printed SKÅDIS T-Nut Alignment Guides from 6d6178 to ensure vertical alignment.
- 4 x M2.5 screws
- 4 x M2.5 hex nuts to drop into the printed T-nuts listed above.
BOM V2:
- 1 x SKÅDIS Greenworks 40V Battery Holder (this printed part)
- 2 x printed SKÅDIS T-Nuts from 6d6178
- 2 x printed SKÅDIS Alignment Plus (these printed parts)
- 2 x M2.5 screws
- 2 x M2.5 hex nuts to drop into the printed T-nuts listed above
![]() | Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. |
Please post any makes. Thanks and enjoy.
