Ejection seat for L-39 Albatros jets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VS-1BRI Ejection seat for an L-39 Albatros from customwings.cz scale 1:3.5
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 323
- Wydruki
- 0
- Wyświetlenia
- 1757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as the original cockpit scaled down to 1:3.5, but I also can provide you with an original 1:3.5 scale model if required.
Though most ppl will paint the seat components I printed the different parts in three different colors. The color is part of the STL filename where gr is grey, sw is black and ws is white.
all parts are printed in Prusament PETG with original Prusa settings with following parameters:
Layer hight: 0,2mm
Infill: 30 %, cubic and monotonic
All parts are assembled with M2 pan-head screws and/or glued with 2-component resin. The thin headrest supports are made of 2.5mm aluminium tubes.