Ejection seat for L-39 Albatros jets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VS-1BRI Ejection seat for an L-39 Albatros from customwings.cz scale 1:3.5
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 323
- Makes
- 0
- Views
- 1,757
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as the original cockpit scaled down to 1:3.5, but I also can provide you with an original 1:3.5 scale model if required.
Though most ppl will paint the seat components I printed the different parts in three different colors. The color is part of the STL filename where gr is grey, sw is black and ws is white.
all parts are printed in Prusament PETG with original Prusa settings with following parameters:
Layer hight: 0,2mm
Infill: 30 %, cubic and monotonic
All parts are assembled with M2 pan-head screws and/or glued with 2-component resin. The thin headrest supports are made of 2.5mm aluminium tubes.