Cura 4 Brake pads alignment tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alignment block to centre your Formula Cura4 brake pads
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pad alignment tool for Formula Cura4 disc brakes.
4 different versions are included, 1.8, 1.9, 2.0 and 2.2mm.
Print the one you need according to your rotor's width, or a bit smaller if they are used.
Insert this into you caliper and pump your brake lever to press your pads against it. This will align them with the centre of the caliper, to the selected width.
Now mount the caliper as usual and do the final adjustment on the rotor before torquing the caliper bolts.
Enjoy immediate bite on your newly centred pads.
The 1.9mm version has to be printed in 0.16mm layer or it will be rounded up to 2.0mm at 0.2mm layer height.
For the width to be precise, it's best to have PETG as a support interface with z distances and interface spacing set to 0.