1 / 8
Spool spacers for reuse, rewind last meters to save space — zdjęcie 1
1 / 8

Spool spacers for reuse, rewind last meters to save space

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reuse Prusament spool sides! Adapt for less or more filament than 1kg/2kg. Available 530, 750g, 1, 1.25, 2kg and custom

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

Printing

  • Use “draft” mode, with layer height 0.30 or 0.25.
  • Enable brim, to be completely sure also set type to “inner and outer brim”

Designed for a friction fit, though you can use M4 screws from the side as well.

Use:

  • IMPORTANT: for the 530gr version only, you need to partly saw off ONE side piece (see pictures)
  • the other sizes work with unmodified spool sides, just slide off the original cardboard and slide on

If you need other sizes, just scale the model in Z-height in your slicer (60mm high is for 1kg)

Tagi