1 / 8
Spool spacers for reuse, rewind last meters to save space — image 1
1 / 8

Spool spacers for reuse, rewind last meters to save space

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reuse Prusament spool sides! Adapt for less or more filament than 1kg/2kg. Available 530, 750g, 1, 1.25, 2kg and custom

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
221
Reviews
0

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

Printing

  • Use “draft” mode, with layer height 0.30 or 0.25.
  • Enable brim, to be completely sure also set type to “inner and outer brim”

Designed for a friction fit, though you can use M4 screws from the side as well.

Use:

  • IMPORTANT: for the 530gr version only, you need to partly saw off ONE side piece (see pictures)
  • the other sizes work with unmodified spool sides, just slide off the original cardboard and slide on

If you need other sizes, just scale the model in Z-height in your slicer (60mm high is for 1kg)

Tags