Kenwood pasta roller shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kenwood pasta roller shaft
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
*NOTE*
I managed to print it and it fits, the rollers will also move when you turn the machine on. It is not yet tested with actually making the pasta, i hope to do this soon.
UPDATE
Used it and the fully printed PLA does not hold up to the force. It worked for 15min but after that it snapped. If you are able to print it in a stronger material it might work, or get it printed in some metal for around 30 euro.
Had an accident and managed to break the shear shaft in my Kenwood pasta maker.
After hours of searching i could not find a replacement shaft only.
So decided to model one and try 3D-printing it.
this one fits the original holes and also has the space to put the O-ring that is on the original.
My pasta maker model was KAX980ME.
But it came from the set with 2 other ones and I assume they share their shaft design.
Ordered a cheap version on Ali to hopefully transplant the shaft, this one is different so this one will not fit those pasta makers.
Printed it with 8 top layers, 8 bottoms layers and 8 walls.