Servo-drive for two Festo ball-valves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Servo-drive for two 4mm or 6mm Festo ball valves with high-voltage servo
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 789
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In jet models Festo ball-valves are often used to cut-off the fuel pipe to the turbine after landing or during the refuel prozess to prevent the turbine from flooding with kerosene. Some ppl prefer to cut-off the refuel pipe with a ball-valve instead of using a self closing filling valve. With this servo drive two ball-valves are operated in opposite directions so that either the turbine valve is open or the refuel valve is open.
The model is designed for X-612 servos from f3x.de (and identical in construction from other brands) and the Festo 4mm and 6mm ball-valves.
All screws are M2
Material is PETG, 0.20 mm layer hight, 20% infill