Servo-drive for two Festo ball-valves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Servo-drive for two 4mm or 6mm Festo ball valves with high-voltage servo
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 45
- Makes
- 0
- Views
- 791
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In jet models Festo ball-valves are often used to cut-off the fuel pipe to the turbine after landing or during the refuel prozess to prevent the turbine from flooding with kerosene. Some ppl prefer to cut-off the refuel pipe with a ball-valve instead of using a self closing filling valve. With this servo drive two ball-valves are operated in opposite directions so that either the turbine valve is open or the refuel valve is open.
The model is designed for X-612 servos from f3x.de (and identical in construction from other brands) and the Festo 4mm and 6mm ball-valves.
All screws are M2
Material is PETG, 0.20 mm layer hight, 20% infill