XR Molex to Superflux 'clamping' adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to allow you to run a superflux connector inside an XR molex 6 pin style box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters to allow you to run a superflux connector inside an XR molex 6 pin style box.
There isn't enough room to allow you to run the nut included with the superflux plug in the molex opening so I designed a 2 piece “clamping” adapter.
--------------------------------------------
2 Variants:
For use with Flowglider / Atlowglider / TFL “The Box”
6p Molex to SF Adapter - 12.step
Atlow Connector Cover - 1,3 - Superflux.stl (may be able to use the stock box cover variant or mod your existing cover)
For use with Stock box (the 6 pin is further away from the rail)
6p Molex to SF Adapter - 13 - Stock.step
Flowglider Conn Cover SF - Stock Box - 11.step
Requires 4x countersink m3 or #4 plastic coarse thread or wood screws (8mm length, 3/8" to 1/2")
2x #10 plastic screws recommended to fasten the adapter to the box (8mm length, 3/8" to 1/2")
--------------------------------------------
Remove the superflux nut, Leave the oring on the superflux connector - Add some silicone on it to help seal.
Insert superflux connector, tighten the 4 screws to clamp it down.
Gasket maker RTV or Silicone the mating surface and screw the whole assembly into your box.
Included files: caps for the hall plug that uses the same #4 screws