XR Molex to Superflux 'clamping' adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to allow you to run a superflux connector inside an XR molex 6 pin style box.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters to allow you to run a superflux connector inside an XR molex 6 pin style box.
There isn't enough room to allow you to run the nut included with the superflux plug in the molex opening so I designed a 2 piece “clamping” adapter.
--------------------------------------------
2 Variants:
For use with Flowglider / Atlowglider / TFL “The Box”
6p Molex to SF Adapter - 12.step
Atlow Connector Cover - 1,3 - Superflux.stl (may be able to use the stock box cover variant or mod your existing cover)
For use with Stock box (the 6 pin is further away from the rail)
6p Molex to SF Adapter - 13 - Stock.step
Flowglider Conn Cover SF - Stock Box - 11.step
Requires 4x countersink m3 or #4 plastic coarse thread or wood screws (8mm length, 3/8" to 1/2")
2x #10 plastic screws recommended to fasten the adapter to the box (8mm length, 3/8" to 1/2")
--------------------------------------------
Remove the superflux nut, Leave the oring on the superflux connector - Add some silicone on it to help seal.
Insert superflux connector, tighten the 4 screws to clamp it down.
Gasket maker RTV or Silicone the mating surface and screw the whole assembly into your box.
Included files: caps for the hall plug that uses the same #4 screws
