Route Werks double Bar Fly mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit two Bar Fly or other computer mounts on a Route Werks original handlebar bag
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Adapter fits two bar fly style mounts on the lid of a Route Werks original handlebar bag.
Note that the holes are sized to self-tap (aka: force) M3 screws through so you can use generic 20mm spaced bike computer mounts. BarFly uses M4 holes, so you will need to drill them out a little to 3.5mm or 9/64" and, depending on the tech mount, countersink them. One side also has holes to fit M4 nuts.
This adapter needs the Route Werks's Bar Fly adapter. and I have also use some double sided tape to hold down the sides a bit more so my light doesn't vibrate.
I wasn't thinking and printed this right side up with supports. It can probably be printed upside down with no supports. That would also allow a version to be printed that does not need the Bar Fly adapter on the lid.