Route Werks double Bar Fly mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to fit two Bar Fly or other computer mounts on a Route Werks original handlebar bag
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Adapter fits two bar fly style mounts on the lid of a Route Werks original handlebar bag.
Note that the holes are sized to self-tap (aka: force) M3 screws through so you can use generic 20mm spaced bike computer mounts. BarFly uses M4 holes, so you will need to drill them out a little to 3.5mm or 9/64" and, depending on the tech mount, countersink them. One side also has holes to fit M4 nuts.
This adapter needs the Route Werks's Bar Fly adapter. and I have also use some double sided tape to hold down the sides a bit more so my light doesn't vibrate.
I wasn't thinking and printed this right side up with supports. It can probably be printed upside down with no supports. That would also allow a version to be printed that does not need the Bar Fly adapter on the lid.