AB3 Colorful counter for babies
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my third print for babies (cats) activity board. A simple counter that they can play with and learn colors.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Haptic Models
- Licencja
- Creative Commons — Attribution — Share Alike
This is ideal for babys tummy time to watch something colorful, that they can play with.
Or for cats to destroy.
Printing:
Use 3 perimeters for the balls but at least 5 for the rest (for added rigidity), everything 15% adaptive cubic infill.
Print the rod laying down so that it does not break along the layer lines.
Print as many balls as you want and preferably in different colors.
Assembly:
In addition to the 3D printed parts you will need 6 screws. 4 of them to attach the assembly to the board and two of them to attach the rod to the holders.
The rod can be 3D printed or you can use a piece of old broken coat hanger instead.
Check out my other models in this series: https://www.printables.com/@Bobino/models
