1 / 5
Adapter Plate for UniFi Lite 8 PoE (USW-Lite-8-POE) to Flex 2.5G PoE (USW-Flex-2.5G-8-PoE) — zdjęcie 1
1 / 5

Adapter Plate for UniFi Lite 8 PoE (USW-Lite-8-POE) to Flex 2.5G PoE (USW-Flex-2.5G-8-PoE)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With this adapter plate you don't need to drill new holes into your wall.

Ocena
0 / 5
Polubienia
4
Pobrania
69
Wydruki
0
Wyświetlenia
794
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I'm sure there are people which replaced their UniFi Lite 8 PoE (USW-Lite-8-POE) with the newer Flex 2.5G PoE (USW-Flex-2.5G-8-PoE). However, with that comes a new wall mounting adapter plate which has a different horizontal hole spacing.

With this adapter plate you can just reuse the old holes. Remove the old wall mounting adapter plate, screw on this 3D printed adapter plate and then screw on the new wall mounting adapter plate with M3x8 or M3x10 screws.

The design uses threaded inserts: M3x5.7 mm.

Tagi