1 / 7
Mod of OzRocky case for Pi-5 with Pimoroni NVMe Duo Base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This base will fit the Raspberry Pi 5 with the "Pimoroni NVMe Base Duo".
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just the base of the box. You need the Lid and the Button from the original.
The box has several small holes to be able to see the status lights. I used some transparent filament pieces that I cut at an 45-degree angle and pushed through the hole until it touches the LED. Then I cut them off on the outside and used some 1000+2000+3000 grain sanding paper to buff up the ends.