1 / 7
Mod of OzRocky case for Pi-5 with Pimoroni NVMe Duo Base — image 1
1 / 7

Mod of OzRocky case for Pi-5 with Pimoroni NVMe Duo Base

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This base will fit the Raspberry Pi 5 with the "Pimoroni NVMe Base Duo".

Rating
0 / 5
Likes
1
Downloads
32
Makes
0
Views
173
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is just the base of the box. You need the Lid and the Button from the original.

The box has several small holes to be able to see the status lights. I used some transparent filament pieces that I cut at an 45-degree angle and pushed through the hole until it touches the LED. Then I cut them off on the outside and used some 1000+2000+3000 grain sanding paper to buff up the ends. 

Tags