1 / 4
Headphone desk-mounted hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
An easy to print desk-mounted headphone hanger, for your gaming headset/bluetooth headphone.
Printed with an “Elegoo” Neptune 4, with an 0.4mm nozzle, basic settings for speed, and no supports. layer height is 0.2mm.
It consists of 3 parts, the body or the hanger itself ( Which can accomodate tables with less than 5cm thickness of the top, and a width of ~5 cms for the headphones )
- The body itself should be printed on its side, to avoid supports or overhangs
- the other 2 pieces should be printed in a vertical manner, no “Spiral Vase” needed.
And after the print, the thread is with enough tolerance to withhold the pressure, and the ball socket is loose ( But not too loose ) so it could be mounted easily and adapt if there's a small taper angle in the table-top.