Headphone desk-mounted hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A basic headphone hanger for your desk if your desk is flat ( Preferrably ). With an adjustable ball socket to adapt.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
An easy to print desk-mounted headphone hanger, for your gaming headset/bluetooth headphone.
Printed with an “Elegoo” Neptune 4, with an 0.4mm nozzle, basic settings for speed, and no supports. layer height is 0.2mm.
It consists of 3 parts, the body or the hanger itself ( Which can accomodate tables with less than 5cm thickness of the top, and a width of ~5 cms for the headphones )
- The body itself should be printed on its side, to avoid supports or overhangs
- the other 2 pieces should be printed in a vertical manner, no “Spiral Vase” needed.
And after the print, the thread is with enough tolerance to withhold the pressure, and the ball socket is loose ( But not too loose ) so it could be mounted easily and adapt if there's a small taper angle in the table-top.