Belted Ender - Mini XZ plates - Z linear rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tweaked version of my belted ender, but with fully printed XZ plates - ender3/3pro
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
if you already have my belted z setup the top and bottom parts are the same, and the Z tensioner design is the same.
I only made the red spring model (15x4mm generic cast spring from amazon/Ali)
you can also use M4x16 instead of the spring
Previous belted z belt top/bottom parts are included in the zip and are unchanged.
documentation is scarce, but should be relatively intuitive from the renders, but If you have any doubt or question don't hesitate to ask.
tensioner uses a 5x20mm dowel.
the rest is standard, lots of m3x8 and lots m3 t-nuts
and heat inserts m3x4mm long x 4.6 or 5mm OD
just a few M3x12 and M3x16 are also needed
And an optional M4x10 or M4x20 that secures one side directly into the X extrusion, but it's overkill anyway, so no problem if you don't have either.
regarding rails, two 300mm MGN12H on Z ender3/3pro/3v2
for the price these are very decent: Amazon
----
April 18 2025:
- Left front ZX plate - improved X motor motor - now M3x16 or M3x25 screws
- pulley cover (to be compatible with the tweaks to the front XZ plate)
----
Only partial ender3max support, the lower part are included and tested, but haven't actually tested the XZ plate fit on a 3max, and front plates may need to be tweaked, but will do that soon (if you are interested and want it sooner, let me know)