Camera Rail for IKEA Lack Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera rail for usage in an IKEA Lack Enclosure. The rail is attached with M4 wood screws to a leg of the table.
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A camera rail for usage in an IKEA Lack Enclosure. The rail is attached with M4 wood screws to a leg of the table. The slider is steplessly adjustable with a M3 screw. The camera is attached to the slider with cable ties. The adapter is desgined to fit a logitech quickcam pro 9000. If you use another camera you only have to design your own adapter.
A couple of M3 screws and hexnuts are required for assembly. There is a flat plane to stick an LED strip to it. The camera horizontal view angle is 45°. Vertical pitch is adjustable.
Print Info:
- Material: PLA (Prusament Jet Black)
- Layer Height: 0.2mm
- Infill: 15%
I printed the rail with supports and large brim. The side with the rail should point upwards to have a nice finishing layer. It fits diagonally on the MK3S+ printbed.