Furniture legs, eg. for Ikea Kallax 2x2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal furniture leg, approx. 12cm in height. To use with screws 8mm screw head diameter, will hold about 80kg. max.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 144
- Wydruki
- 2
- Wyświetlenia
- 604
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this furniture leg mainly to use on ikea kallax 2x2.
Mount with 8mm diameter screw heads, just be careful not to overtighten as it could crack the mounting plate.
I'm not an expert but I printed this with 4 walls and 15% grid infill pattern, vertical strength is good but horizontal strength might fail where the leg meets the mounting plate, so just be careful while moving around your furniture. I tested this on an ikea kallax 2x2 as shown in the picture with my weight on it, so I can approve it will withstand weight of about 80kg
Note: The photos show the first version/concept of the legs, where they were facing in a wrong direction (I don't know if that makes sense to you but just look at the way the plate is mounted to the furniture).
This is fixed with the current version, as I already rotated the mount plate so you can install it parallel to the sides of your furniture.
Don't forget to add furniture felt pads ;)
Happy printing and have fun with your diy project!