LayersFactory
Zgłoś model
1 / 3
CREALITY K1max - SIDE PANELS WITHOUT LOGO [CLOSED + SPOOL HOLDER] — zdjęcie 1
1 / 3

CREALITY K1max - SIDE PANELS WITHOUT LOGO [CLOSED + SPOOL HOLDER]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Creality Parts & Upgrades
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉.

 

*This project aims to replace the printer's side panels.

 

/////ATTENTION 

*The assembly guide is available as a PDF at the bottom of the files section.

NAME - K1max_SIDE_PANEL_WHITOUT_LOGO_GUIDE.pdf

If you use the version with the sensor repositioning, you need to INSTALL [4x] M3 D5 L5mm INSERTS ON WALL 3 on the RIGHT side.

______________________________________________________________________________________________________________

/////LINKS FOR THE HARDWARE USED IN ALL MY PROJECTS * affiliate links

INSERTS M3 x 4mm (L) x 5mm (D): https://amzn.to/3EovAVw

HEX SOCKET CAP M3 6mm-30mm (STAINLESS): https://amzn.to/4imGAQW

HEX SOCKET CAP M3 6-20mm (BLACK): https://amzn.to/3R7wjx4

FLAT HEAD SOCKET CAP M3 4mm-12mm (STAINLESS): https://amzn.to/3G3Z1wr

FLAT HEAD SOCKET CAP M3 8mm-25mm (BLACK): https://amzn.to/43JeThP

________________________________________________________________________________________________________________

Before starting printing the pieces, I recommend printing this tool https://www.printables.com/model/899470-xyz-accuracy-test-calibration-tool to test the dimensional accuracy of your printers and use this tool https://www.printables.com/model/480907-shrinkage-calculator-dimensional-calibration-tool to determine the correct scale based on the filament shrinkage you’ll be using.

  • The pieces were developed with very tight tolerances (0.2mm) to ensure proper alignment and functionality of the assembly, so it’s important to make sure everything is well-calibrated or that you understand what is needed for everything to work correctly.
     


/////DESCRIPTION

K1max  HONEYCOMB CLOSED SIDE PANELS - WITHOUT LOGO

This project aims to replace the printer's side panels.
 

The project parts should be printed in ABS or similar materials due to their resistance to high temperatures, ensuring durability and reliability.

Tagi

wallcrealityhoneycombpanelk1max