1 / 4
BMW R1250R / RS 60mm Hub Cap Clip — zdjęcie 1
1 / 4

BMW R1250R / RS 60mm Hub Cap Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clips for 60mm Hub Caps to snap into the hub of a BMW R1250R / RS

Ocena
0 / 5
Polubienia
5
Pobrania
29
Wydruki
0
Wyświetlenia
285
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Clips for 60mm Hub Caps to snap into the hub of a BMW R1250R / RS

Hub Caps can be found on Ebay etc. Designed for 60mm caps with 5 clips.

Snap off the original clips and glue the model in place.

Wire ring clip can be reused, model mounts via friction fit. 

Prints fairly easy, supports may be required depending on your bridging capabilities.

Prints with the shorter side down.

Tagi