Easter Egg - Impossible Pass-Through
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A real pass-through egg!
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 525
- Wydruki
- 2
- Wyświetlenia
- 1942
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- GNU General Public License v3.0
The egg is 105 mm high and is completely pass-through.
As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The holes in the base of the outer part are there so that a piece of filament can be inserted after printing to increase stability.
The 3mf-files have set material changes and specific modifiers to make the model more stable on the base.
For the print in the photos I used dual color Overture PLA Silk (red-gold) and for the baseplate a Creality White PLA.
The model was created with FreeCAD 1.0.