Easter Egg - Impossible Pass-Through
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A real pass-through egg!
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 525
- Makes
- 2
- Views
- 1,942
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- GNU General Public License v3.0
The egg is 105 mm high and is completely pass-through.
As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The holes in the base of the outer part are there so that a piece of filament can be inserted after printing to increase stability.
The 3mf-files have set material changes and specific modifiers to make the model more stable on the base.
For the print in the photos I used dual color Overture PLA Silk (red-gold) and for the baseplate a Creality White PLA.
The model was created with FreeCAD 1.0.