Ender 3 Pro Linear Rail MGN12C Remix - Reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original model to fit MGN12C carriages instead of H ones and reinforced
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the original model to fit MGN12C carriages instead of H ones.
Change for 15x20mm Pattern M3 carriage holes with M4 Nutset for the Bedplate
Reinforced on certain areas +1mm for good measure
If you want maximum rigidity between the dual Rails, add the .step to a CAD Software, measure the Distance between them mounted on your printer ( print test pieces that bolt to the rails temporarly ) and just draw a nice big X between them under the buildplate so it Fits your Setup perfectly. Now the Carriages cant wobble that much when mounted seperately.
My maximum Z space is limited to 245 in my Firmware after this mod.
Feel free to leave a make, short picture upload, done. Thank you very much