Lenovo ThinkPad Universal Thunderbolt 4 Dock - Underware/MultiBoard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lenovo ThinkPad Universal Thunderbolt 4 Dock Mounting Plate to MultiBoard/Underware using Multiconnect Connectors!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 723
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Mount your Lenovo ThinkPad Universal Thunderbolt 4 Dock to MultiBoard/Underware using Multiconnect Connectors!
This model is uses the existing screw mounting holes and the inset edges in the Dock to lock the print to the Dock. It uses a slight bending of the plate to lock the two pieces together.
Once the assembly is mounted to the Multiboard, this bending will be very unlikely, hence safely locked in place. :)
Print with 3 perimeters and 15% Gyroid Infill. No Supports should be necessary if your printer does bridging decently. Due to Heat of the Dock PLA is not recommended!
I printed this only once and I didn't clean the bed, hence one side didn't stick enough to the bed, but worked good enough anyway.