1 / 5
Dirty/Clean Dishwasher Magnet (8mmx3mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dirty/Clean (1-colored) magnet for my Dishwasher. Magnet to be used is a 8mmx3mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
My very first model design (Feel free to remix or enhance it!)
I recently bought my very first 3D Printer (AnkerMake M5C) and since it has only 1 Filament, it is easier to print single-colored models.
I wanted a Dirty/Clean Magnet for my dishwasher so I came up with this design. Please feel free to give feedback or remix with enhancements!
Print Info
- It took about 36m:24s minutes to complete
- It used 11g of Filament
Recommended config
- 8mmx3mm Magnets (Something like this)
- Normal Speed (Fast ended with deformaties)
- 4mm Outer-Brim
I used 2x magnets but you can probably use just 1. I glued it so it won't come off at all.
Enjoy!