1" to 1/2" reducer for overflow vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1" to 1/2" reducer for overflow vent on a rain collector
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lidl collapsible rain barrel has a 1" overflow valve, needed a reducer to 1/2" so the excess water is disposed elsewhere.
The reducer's thicker part has an inside diameter of 1" and the thinner part a ½" outside diameter. Both have small ridges to grab better. The thicker part fits on Lidl's collapsible rain barrel without fasteners for the pipe some fastener recommended (I had a non-standard pipe on the picture)
Printed with TPU - other filaments would be too brittle for this application (PETG could probably work, but would fit only with heating).