1 / 2
1" to 1/2" reducer for overflow vent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1" to 1/2" reducer for overflow vent on a rain collector
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lidl collapsible rain barrel has a 1" overflow valve, needed a reducer to 1/2" so the excess water is disposed elsewhere.
The reducer's thicker part has an inside diameter of 1" and the thinner part a ½" outside diameter. Both have small ridges to grab better. The thicker part fits on Lidl's collapsible rain barrel without fasteners for the pipe some fastener recommended (I had a non-standard pipe on the picture)
Printed with TPU - other filaments would be too brittle for this application (PETG could probably work, but would fit only with heating).