Ribber Cover for SRP 60N
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple snug-fitting ribber cover for the Silver Reed SRP 60N ribber. I couldn't find one, so I made one.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
If you are a machine knitter then you know what a pain it is to have your work snag on the ribber gate pegs when it's not in use. This cover was created to alleviate that problem with the added benefit of keeping the ribber bed clean.
4 prints are enough to cover the entire bed. I used Overture PLA and default settings in PrusaSlicer on a Prusa MK4S with added supports. It was printed face down to allow for a larger, more stable print than trying to print it vertically to avoid supports.
The cover fits the entire print bed, I don't have enough printing experience to tell you how to adjust for smaller print beds, nor do I have any other 3D printers or knitting machine ribbers to make something custom. Please feel free to remix.