BTT SRK E3 V3 + Pi zero2 v0.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for Board, Pi, external mosfet Creatlity orignal, dual fan Work in Progress
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I try find some nice and simple box for my electronics. But I didnt. So I try make my own.
This is second try.
When I use wood to build my Enclosure, I try use same desing to printer box. So I use beech cladding strips for walls on sides.
Also I want good air flow. So use 2 noctua fans is must have for me.
I was inspired to place the Pi above the SKR board, so I designed a minimalist holder.
As with all my designs, I always prefer brass threaded inserts. Because something always happens and I have to disassemble it several times. If I screwed it directly into the plastic, it wouldn't hold when screwed back on. I don't like using nuts, I have to think about where to put the nut and how to incorporate it into my design.