Simple USB and SD card holder with tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for all your USB and SD card storing needs! As well as any tiny little screws you find along the way :)
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 191
- Wydruki
- 2
- Wyświetlenia
- 625
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A little organizer for all your portable media storing needs!
Featuring 8 of the classic USB slots (And 3 USB-C slots if you're feeling a little fancy), as well as 4 SD card and 7 Micro-SD card slots, this baby has all the portable media storage that you've been looking for!
Tired of those pesky little screws rolling around on your table? Well worry no more! For this organizer comes with a small (But effective!) tray with a lip around the edges to make sure that your favorite little screws will be kept safe until you need them!
I printed this model on a stock Ender-3 using these settings:
Layer Height: 0.2mm
Infill: 25% (Lower than that should be fine as well)
Infill Pattern: Gyroid
Top Layers: 3
Bottom Layers: 3
Wall Count: 3
Adhesion Type: Skirt
If your printer is known to struggle with bed adhesion then I recommend using a brim rather than a raft, due to the models relatively small footprint (87 x 42mm).
I hope you enjoy the model! Please leave a comment if there's anything you wanna know or if you want a slightly tweaked variant (More USB slots etc.) and I'll gladly make it and add it to improve the experience for other users :).