1 / 7
fits Tactical WMW Rifle Wall Hook — zdjęcie 1
1 / 7

fits Tactical WMW Rifle Wall Hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use at your own risk !

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made to fit a certain * tactical * company's * walls * system, with random screws of your choice that fit. I like to heat the screws lightly before screwing them in, so they'll easily self-thread. Be careful not to over-heat. 
This is not made, affiliated or designed by the above mentioned company.

Use at your own risk. I have not had any problems so far. These have a 2" filleted semicircle design, with all other edges besides mounting edge chamfered.

 

I printed with Creality PETG at 85C/265C throughout 

25mm/sec .12 first layer

250-270mm/sec .2 all subsequent layers, slow for overhangs

10% infill (you can always add more if you want)

3 top shells, 3 bottom shells, 2 wall loops

print flat on side, no supports/brims etc