fits Tactical WMW Rifle Wall Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use at your own risk !
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made to fit a certain * tactical * company's * walls * system, with random screws of your choice that fit. I like to heat the screws lightly before screwing them in, so they'll easily self-thread. Be careful not to over-heat.
This is not made, affiliated or designed by the above mentioned company.
Use at your own risk. I have not had any problems so far. These have a 2" filleted semicircle design, with all other edges besides mounting edge chamfered.
I printed with Creality PETG at 85C/265C throughout
25mm/sec .12 first layer
250-270mm/sec .2 all subsequent layers, slow for overhangs
10% infill (you can always add more if you want)
3 top shells, 3 bottom shells, 2 wall loops
print flat on side, no supports/brims etc