1 / 10
Adjustable Geared Hinge with Screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 2 (recommended)
- works with all doors from 3-6mm thickness
- added a slotted hole on the mounting Side of the Door
- added a M5 Thread, so you just need Screws to fasten the “Spange”
- prevents from loosen the nuts
For assembly for Version 2 you need:
4x M5x12 or M5x16 or M5x20 Cylinder Head Screws
4x M5x15mm Washer
may you have to cut the thread after printing
Version 1 (just for archive)
- works with all doors from 3-6mm thickness
For assembly for Version 1 you need:
2x M5x55 Cylinder Head Screws
4x M5x15mm Washer
2x M5 Nut
For mounting on 20x20mm Aluminum Extrusion:
2x M5x10 or 2x M5x8 Cylinder Head Screws
and last but not least the screw, washer, nut for your door.
I think it can take a fair bit more torque than the original version, has a larger spread angle, and is easier to print.