858D hot air station tip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for eight 858D hot air station clamping tips.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I wanted to store my hot air station tips on the station itself, so I made this organiser. It clamps onto the side wall of the tip firmly, and should work with any ~23-25mm diameter tips. The pictured print is with a 0.25mm nozzle, 0.10mm layer height, but it should work with a coarser print as well.
The holder attaches to the top of the station with M3 screws, strong enough double stick tape should work as well if you don't feel like adding new holes to your station.
Greets to vurpo for coming up with the clip idea and helping out!!
Onshape source for remixing etc: https://cad.onshape.com/documents/9fb7951c3539ca3a2a571d71/w/c97c62539323395018fdc473/e/9bad4c9d21da73805a412187?renderMode=0&uiState=67ebf5a03aa5f94321a2d546