Liczymy pasujące modele…
You will need for assembly: 2-4 studs m3 (10-15 mm) 2-4 nuts m3 3 brass spacers m4 (diameter 6 mm) 3 screws m4 30 mm if your original stand is lost, use this model…
The hot air wand holder can mount on the original base or be mounted separately as needed. If you install the magnets is will allow the station to automatically turn off when the wand is in the holder. The wand collars are not threaded…
A tip and nozzle holder for Yihua 8786D Soldering Station with mounting holes for adding accessories. The holes are for 4mm screws and are on 10mm centers. It holds 10 tips and 4 nozzles.
The title says it all. This box will hold three of the four tips that go on the heat gun and have a small area for the extra nuts and screws. The presumption is that the fourth tip is on the heat gun itself. The box is built using the…
This thingy is a very basic top plate for my YiHUA 862BD+ hot air soldering station. It provides room for 6 hot air nozzles, 15 soldering tips, a spool of filament, a can of soldering flux, various diameters for tools (I store the SMD…
Description Features: 4 slots for hot air nozzles (dia. 25mm + cutout for locking screws) 9 slots for soldering tips (up to 8mm) 1 loose items tray Printing instructions any layer height - higher recommended for faster printing print flat…
This is just a simple tray to make it easier to store this when I'm not using it.
Lost or broke original one? You will need 2x, M4x12 (ISO7045/DIN7985) screws to mount it. DIN912 or ISO4762 should be fine too. Design is optimized up to 0.35 mm layer height, and up to 0.6 mm nozzle.
A few small accessories for the Yihua 2-1 in soldering/hot air station (might work on others, seems like the soldering handle stand is shared with others). angled soldering tip holder vertical soldering tip holder Both can be mounted on…
This is the hot air nozzle holder for the YIHUA 995D+ EVO. Print Settings Printer brand: Anycubic Printer: Kobra 2 Adhesion: Yes (but not necessary) Supports: No Resolution: 0.2 Infill: 20% Filament material: PLA
So my bench is a watchmaker's bench and my workshop is a 1-car garage, which means stuff needs to be portable. I needed a rework station and they all pretty much assume they own your workspace and maybe elsewhere? But not around here they…
A simple mount that grasps your Yihua 882D soldering station in just the right places so you can mount it on the wall. Updated version from pictures now has better screw locations to hold the mount more securely on to the wall. Printed in…
I bought a 10 piece set of Yihua tips for my soldering station and thought it would be nice to have a stand for them for easy access. I assumed 1 tip will be installed in the soldering iron so I made 9 holes stand for the other tips. Note…
The YIHUA 858D hotair station is shipped with different nozzle attachments. Mine came with “hose clamp” styles ( with screws). So I made this one for 3 nozzles, which fits on top of the station. There is space for 4 magnets d=8mm h=2.8mm,…
A tight fit, especially the power switch. I'm including some basic 2" spacers and the step file, so you can make any necessary modifications.
Holder for Soldering Iron Tips 900M-T on Yihua 882 D station. Connect to station with double-sided adhesive tape.
Tips holder for the YIHUA 862BD+
I couldn't help myself! I absolutely had to have a custom case for all the accessories that come with a Yihua 948 solder suction station (the standalone suction station, not combined with any soldering tools). If you absolutely have to…
Holds 3 C245 soldering tips & a pair of pliers and can be mounted instead of the spool holder
Simple wall mounted hotair nozzle holder for Yihua 993DM IV. Design in mind “too big is big enough” ;P Slot diameter: 21,2mm Mounting holes for 3x15mm wood screw. Printed as it is, with 0,3mm layer height, 15% infill, without supports.…
[EN] You can find the description in English below. Soporte diseñado para organizar y tener siempre a mano las boquillas de la estación de aire caliente Yihua 858D. Se instala fácilmente en el lateral de la carcasa mediante 2 tornillos…
A falling piece of timber smashed the top of my solder station. My particular brand was “Yihua” - I think there are a lot of clones out there. I designed this in TinkerCAD (phew!). It was what prompted me to look into parametric modelling…
Print instr. same as nadirs ID 18.5mm ----------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)
A simple accessory tray that snugly snaps on to the top of your soldering station to keep parts from jangling around in a drawer or all over your desk. Just snap the legs onto the soldering station and use superglue to attach the top…
Labor Ständer für 16x1,5mm Rohr Für die gedruckte Grundplatte benötigt man: 4x Senkschrauben M4x20 4x kurze Gewindeeinsätze M4 Aus gewichtsgründe habe ich eine 24mm Siebdruckplatte 200x150mm genommen. Dazu benötigt man: 4x…
I wasn't a fan of the "stuck down" container for the tip cleaner so I did my own even had some filament in a strangely good color match, I have added the location if you feel the need to screw it down from under neath but its a tight fit…
I made the holder for my Yihua 853D, but it should also fit most other models as they use the same construction. Though there are a few exceptions like the 993DM, 992D-II and 8509-I On the bottom side there is space for the two magnets…
I created a different model to put my Yihua 882D Soldering station on the wall https://www.printables.com/model/412997-yihua-882d-wall-mount but that meant I had to get rid of the solder iron holder as it would now be pointing down! This…
The Yihua 959D is a pretty decent hot air station for the price. There were two annoyances: First is the unit is so light, it doesn't stay put on the workbench. I made some brackets that attach to the case using the case screws, then…
No one else had made one of these so decided to give it a shot. I offset 0.15mm on each face to allow for clearance, fits snug and perfect. But please keep this in mind before printing. I printed in PLA so keep this in mind. If you need a…
Because the holder from timskloss collided with the frontcover of the Yihua, I redrawed the whole thing and did the following modifications: shifted the holder-plate up/to back some millimeters do avoid the collision with the front cover…
Print vertically with auto support enabled and a 5mm brim.
This is a wall mount solution for the Yihua 959D hand held part. The standalone version can directly bolted to any surface. while the other version fits on Multiboard panels.
A compact holder for the Yihua 8786D soldering station. Stores 3 hot air gun nozzles on the side and mounts with two M4×6 screws. 🖨 Print time: ~31 min ⚖ Filament: ~11 g ⚙ Settings: 0.2 mm layer height, 3 walls, 20% infill Setting Value…
PETG 4 perimeters, 50% infill, no support, 5X hotnut (M3X4X4.2) , 5X M3X6
On the recommendation of a colleague, I purchased the YIHUA 928D-IV Soldering Iron Pen https://www.amazon.com/dp/B0DK995CB5 and I love it. The extremely fine tip is good for soldering the very small SMD components and integrated circuits.…
Simple Organizer for your spare filters, cleaning equipment, spare tips and all that stuff that came with the station.
I designed this holder so that you could keep your C245 and C210 tips (for my Yihua 982D SE but any soldering iron that uses those containers/tips will be fine) in the containers which will help them last. I decided to do 2 rows of 6…
[EN] You can find the description in English below. Lleva tu estación de aire caliente a otro nivel con este rediseño del panel trasero. Olvídate del cable fijo: este modelo incorpora un conector IEC C14 estándar que te permite usar…
Simple hot air tip storage on the Yihua 959D hot air station. I somehow ended up with 8 tips so I expanded the original model to hold them all and also to make it sit flat against the tool station. The angle was also modified a little so…
Einfache Bodenplatte für Yihua 982 III
This is a quick change mount for a Yihua soldering station using their 9071 soldering iron. No magnets or screws, the mount locks on using a mechanical feature. Original Fraks Flexarm project here…
Einfache Bodenplatte für Yihua 8509 I
Einfache Bodenplatte für Yihua 982D I Pro
einfache Bodenplatte für die Heißluftpistole YIHUA 959D-II + Oberteil für die Düsen. unter der Bodenplatte habe ich eine antirutschmatte geklebt. Oberteil habe ich mit doppelseitigem Klebeband befestigt…
Simple solder spool holder for a Yihua 853D SA II solder station
On the recommendation of a colleague, I purchased the YIHUA 928D-IV Soldering Iron Pen https://www.amazon.com/dp/B0DK995CB5 and I love it. The extremely fine tip is good for soldering the very small SMD components and integrated circuits.…
I have a tiny workshop and whenever a new gadget appears, I always have to find a way to save space to keep everything... less messy. With that in mind, this is a stand for the Yihua 995D+EVO hot air rework station with soldering iron.…
Because the holder from timskloss collided with the frontcover of the Yihua, I redrawed the whole thing and did the following modifications: shifted the holder-plate up/to back some millimeters do avoid the collision with the front cover…
[EN] You can find the description in English below. Lleva tu estación de aire caliente a otro nivel con este rediseño del panel trasero. Olvídate del cable fijo: este modelo incorpora un conector IEC C14 estándar que te permite usar…
einfache Bodenplatte für die Heißluftpistole YIHUA 959D-II + Oberteil für die Düsen. unter der Bodenplatte habe ich eine antirutschmatte geklebt. Oberteil habe ich mit doppelseitigem Klebeband befestigt…
I have a tiny workshop and whenever a new gadget appears, I always have to find a way to save space to keep everything... less messy. With that in mind, this is a stand for the Yihua 995D+EVO hot air rework station with soldering iron.…
