Yihua 8786D accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few small accessories for the Yihua 2-1 in soldering/hot air station (might work on others, seems like the soldering…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 650
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A few small accessories for the Yihua 2-1 in soldering/hot air station (might work on others, seems like the soldering handle stand is shared with others).
- angled soldering tip holder
vertical soldering tip holder
Both can be mounted on one of the 3 pairs of holes with M4/M5 screws. Can hold 4 tips with ~7 mm diameter.
brass sponge holder
Take out the sponge metal tray, loosen up the two screws holding the stand on top of the main unit, put the brass sponge in the metal tray and slide the plastic holder underneath the stand all the way to the back. Tighten back the two screws and enjoy.
hot air nozzle holder
Inspiration taken from https://www.thingiverse.com/thing:4498856 , but reworked a little: storage for only 3 nozzles (that's how many spares I have), a bit more compact and the nozzle holders are conical so they auto-adjust a little.
Print instructions
No supports, 3 perimeters, 0.2 15% gyroid.