Yihua station soldering tips stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple soldering tips stand.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought a 10 piece set of Yihua tips for my soldering station and thought it would be nice to have a stand for them for easy access.
I assumed 1 tip will be installed in the soldering iron so I made 9 holes stand for the other tips.
Note that if you print with PLA and possibly PETG inserting a hot/warm tip into stand may melt it so make sure it's room temperature. I guess you should that anyway if you want to avoid burns when removing heated tip from the soldering iron.
Printing:
If you print and find the hole too small you have 2 options here:
- scale the model up
- use X-Y hole compensation with like 0.2mm, for me it was enough
10% infill is completely enough for this print.