Yihua station soldering tips stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple soldering tips stand.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I bought a 10 piece set of Yihua tips for my soldering station and thought it would be nice to have a stand for them for easy access.
I assumed 1 tip will be installed in the soldering iron so I made 9 holes stand for the other tips.
Note that if you print with PLA and possibly PETG inserting a hot/warm tip into stand may melt it so make sure it's room temperature. I guess you should that anyway if you want to avoid burns when removing heated tip from the soldering iron.
Printing:
If you print and find the hole too small you have 2 options here:
- scale the model up
- use X-Y hole compensation with like 0.2mm, for me it was enough
10% infill is completely enough for this print.