Nozzle Holder for Yihua 4 Slots estación de aire caliente
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side-mounted holder for the Yihua 858D that stores up to 4 nozzles, improving organization and accessibility. Easy to in
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 147
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
[EN] You can find the description in English below.
Soporte diseñado para organizar y tener siempre a mano las boquillas de la estación de aire caliente Yihua 858D. Se instala fácilmente en el lateral de la carcasa mediante 2 tornillos M4, aprovechando el espacio sin interferir en el uso del equipo.
El diseño permite almacenar hasta 4 boquillas de forma segura y accesible, manteniéndolas ordenadas y evitando pérdidas.
Características
Capacidad para 4 boquillas
Montaje lateral con 2 tornillos M4
Diseño compacto y funcional
Fácil instalación
Impresión 3D
Material recomendado: ASA (mayor resistencia térmica y mecánica)
Alternativa: PLA (uso básico)
Altura de capa: 0.2 mm
Relleno: 15%
Boquilla: 0.4 mm
Tiempo estimado: ~50 minutos
Ideal para mejorar la organización del área de trabajo y alargar la vida útil de las boquillas evitando golpes o extravíos.
Video: https://www.instagram.com/reel/DWwpDvqDt8O/

A holder designed to keep your hot air station nozzles organized and always within reach. It mounts easily on the side of the Yihua 858D enclosure using 2 M4 screws, making efficient use of space without interfering with operation.
The design allows you to store up to 4 nozzles securely and access them quickly, helping to keep your workspace tidy and preventing loss.
Features
Holds up to 4 nozzles
Side-mounted with 2 M4 screws
Compact and functional design
Easy installation
3D Printing
Recommended material: ASA (better heat and mechanical resistance)
Alternative: PLA (for basic use)
Layer height: 0.2 mm
Infill: 15%
Nozzle: 0.4 mm
Estimated print time: ~50 minutes
Ideal for improving workspace organization and extending the lifespan of your nozzles by keeping them protected and properly stored.