1 / 3
Nozzle-Bracket for Hot-Air-Tool Yihua 959D (FreeCAD) — zdjęcie 1
1 / 3

Nozzle-Bracket for Hot-Air-Tool Yihua 959D (FreeCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After seeing the bracket from timskloss on Thingiverse, I decided to draw my own.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Because the holder from timskloss collided with the frontcover of the Yihua, I redrawed the whole thing and did the following modifications:

  • shifted the holder-plate up/to back some millimeters do avoid the collision with the front cover

  • shifted the holes out 1mm to get a little more room between case and nozzles

  • added substancially more chamfer to the holes for simpler insertion of the nozzles

  • because I swapped the philips-screws of the nozzles with allen-screws for better handling, I added a hole on the top of the plate to store away a 2,5mm allen-key

The part was printed of PLA with a 0,4mm nozzle and a LH of 0,2mm - nothing special.

I put my FreeCAD-file into the model data, feel free to modify it further.

Tagi