1 / 2
GridFinity Yihua 959D Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First bin made for Yihua 959D fan. 0.15 mm offset for snug fit. Feedback welcome! Comment if you need a different size.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
No one else had made one of these so decided to give it a shot.
I offset 0.15mm on each face to allow for clearance, fits snug and perfect. But please keep this in mind before printing.
I printed in PLA so keep this in mind. If you need a different offset, please comment and I'll try to upload it.
Thank you for checking out and please review. My first uploaded model and would really love feedback!
Here are my print settings if you would like to copy.
Nozzle - 0.4mm
Layer Height - 0.20 mm
Line Width - 0.42 mm
Wall loops - 3
Infill - Gyroid
Infill Percentage - 15%