MiniDisc Rack for Ikea Kallax shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MiniDisc Rack for Ikea Kallax shelves.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a WIP, so if there are any problems with dimensions, tolerances or anything else, tell me and I'll try to fix it!
MiniDisc Rack for Ikea Kallax shelves.
Holds 54 MDs. Leaves the back unaccessible, so if you're looking for an efficient way to store your MDs, this is probably not for you.
Since this thing is too big for most printers, I split it into 4 parts, which can be connected using 4 of the connector pieces and some glue. To prevent the slots from sagging, I glued some small wood pieces (like chopsticks) on the back. If your printer is big enough, you can also print the whole thing at once.
I designed the thing to be screwed in place, although you could also experiment with some other way, like tape.
Before you print this, make sure your bed is level and your Z-offset isn't too low, since this could lead to the slots being too tight.