MiniDisc Rack for Ikea Kallax shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MiniDisc Rack for Ikea Kallax shelves.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 685
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a WIP, so if there are any problems with dimensions, tolerances or anything else, tell me and I'll try to fix it!
MiniDisc Rack for Ikea Kallax shelves.
Holds 54 MDs. Leaves the back unaccessible, so if you're looking for an efficient way to store your MDs, this is probably not for you.
Since this thing is too big for most printers, I split it into 4 parts, which can be connected using 4 of the connector pieces and some glue. To prevent the slots from sagging, I glued some small wood pieces (like chopsticks) on the back. If your printer is big enough, you can also print the whole thing at once.
I designed the thing to be screwed in place, although you could also experiment with some other way, like tape.
Before you print this, make sure your bed is level and your Z-offset isn't too low, since this could lead to the slots being too tight.