1 / 4
Aperture ring grip for Light Lens Lab 50mm f/2 ELCAN — zdjęcie 1
1 / 4

Aperture ring grip for Light Lens Lab 50mm f/2 ELCAN

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Finger grip for the aperture ring of the Light Lens Lab 50mm f/2 ELCAN

Ocena
5 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
183
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple finger grip for the Light Lens Lab 50mm f/2 ELCAN lens. This lens is a replica of the Leica 50mm f/2 on the KE-7A, which had a tab on top of the lens for turning the aperture ring. 

This model fits around the aperture ring and adds a more standard two finger grips on either side of the ring. 

It is intended to be stuck on with double-sided tape such as 3M 300LSE

Theoretically this model will probably work on the Leica 50mm f/2 lens from the KE-7A as well, if you have one and are so inclined.

Tagi